Talking about the Reaction Mode of Polyurethane Flexible Foam

Jul 19, 2022

Leave a message

There are two ways to search. One is to explore by the mass fraction of the formula. For example, in a formula, when TDI in 100 parts of polyether is added or subtracted by 1 kg, T-9 is reduced or added by about 7 grams. For example, how much density of foaming silicone oil is used, and a simple empirical formula (approximately inversely proportional) between the density and the amount of silicone oil can be derived. Another example is the minimum amount of TDI, which is an empirical formula with the existence of polyether, water and methane, and so on. The other is "pinch the head to the tail", a continuous chemical reaction, the intermediate changes do not care about it, only the initial reaction concentration (recipe) and the two fragments of the state at the end of the reaction are concerned. It can be said that most of the derived simple empirical formulas that can withstand the test of production are based on this basis, and local application is its characteristic. It would be interesting if we decompose the reaction process into dozens to hundreds of reaction scenarios to recognize and calculate. How to define these reaction scenarios? We really found a substance: catalyst (catalyst). The textbook says that the mode of catalyst reaction is: catalyst reaction ~ catalyst precipitation ~ catalyst re-reaction, such a cycle can be defined as a local reaction. For example: the amount of TDI in your 100% polyether is 60 kg, and the amount of amine is 0.2 kg, so how many cycles are there for a certain reaction in this formula? How many reaction scenarios are there? 

Let's calculate:

60x1000/174=344.83

0.2x1000x2/340=1.1765

(344.83-1.1765)/1.1765=292.1


There are 292 loops with 292 reaction scenarios. If you go through the calculations one by one, there will be no trouble in a few hours. In fact, our entire life process is a recipe change, and the time of day is the catalyst.


As the foaming reaches a certain age, such as more than 20 years, it is found that the effect of understanding the response law based on the quality level is almost zero. Even if I have more than a thousand mature production formulas in my hands, I still can't find the law in our imagination from these changing numbers, and it still feels like a fog. From the point of view of raising a family, I don’t want to go into these reaction changes like doing scientific research, but at least we must ensure that there are more predictions and multiple guarantees in normal production, and less worry and detours. Even if this is not a high requirement, we have not been able to meet it from the understanding of the material quality level. This shows that there are other methods that we are not familiar with (let alone master). Outsiders think that the bubbles that have been made for ten or twenty years are not easy and natural. The fact is, the vast majority of soaking hands, or have a slightly simpler formula, and keep starting all day. Either engage in formulas with high technical added value, require many requirements, narrow the balance range, and the output is not too large. No matter what the situation is, when foaming, you must be very active. Foaming is similar to walking on a tightrope, walking in the not wide equilibrium condition. So wow, even though I've been making bubbles for almost 30 years, once I give myself a few months of vacation and stop the bubbles, when I'm not tangled in my heart, my mentality and spirit are not generally good. Why is it like this? Is it just work stress? I think knowing the method and not being able to do it well is the key.


In view of this, we unconsciously focus our attention on the smaller unit of matter composition: the group. When we recognize isocyanates by quality, there are TDI-80, TDI-65, crude MDI, modified MDI, MDI-50, MDI-100, etc. When we focus on reactive reactive groups, the difference in the above raw materials is equivalent to the difference in the activity of N=C=O groups affected by substituents and steric hindrance. When we look at smaller reaction units, we will find that polyether-type high-rebound bubbles, slow-rebound bubbles, and ordinary bubbles are unprecedentedly similar and unified, and the difference lies in the reaction rate.


A formula is equivalent to the formation of troops before the war between the two armies. Taking the reaction of toluene diisocyanate (TDI) and trihydroxy polyether (PPG) as an example, there are 1-OH (PPG), 2-OH (PPG), 3-OH (PPG), 2.4-4-NCO (TDI), 2.4-2 NCO (TDI), 2.6-2 NCO (TDI), 2.6-6 NCO (TDI), H (water), OH (water) nine reactive substances.


Although the initial activities of the hydroxyl groups in the 1-3 positions of PPG are the same, when one hydroxyl group reacts, the activities of the other two hydroxyl groups will drop significantly, that is to say, 33.3% of the PPG is charged. The same is true for isocyanates, which play a dominant role in the rise of foam due to the high activity of 2.4-4 TDI and its sensitivity to the first-step reaction of water. To determine the effect of this war, one is the quality of officers and soldiers, that is, the nine reactive substances above. The other is the power that each reactant imparts to the forward charge.


There are two main motivations for the above officers and soldiers to rush forward. One is that the mission is completed after an instant force is exerted. For example, the potential energy accumulated when the bow is fully drawn when shooting an arrow is converted into instantaneous initial kinetic energy when the bow is released. , this power is realized by the formula raw material temperature (initial reaction temperature). The other is to continuously accelerate with force, which is like installing a power injection system on the arrow body. When the arrow is shot, the booster starts to work and continues to push the arrow to accelerate forward. This power is driven by the catalyst of the formula (catalyst concentration )which provided. So wow, what kind of high-temperature catalyst should be reduced, how to reduce it, and can it be partially replaced? It's not that simple.


With the power to charge forward, it will be quite a headache for whoever combines with whom, which involves the competition and distribution among the various reacting substances due to the concentration, activity, and reaction mode. For example, the competition between water and polyether in reactive groups for TDI, the competition between 2.4TDI and 2.6TDI for water and polyether, the competition between polyether, water and TDI for catalyst reaction, the effect of catalyst (activation energy) and the reaction system The competition of the effect of instant temperature on the reaction rate, the competition of heat release and heat dilution by gas, the competition also includes the exothermic reaction of OCO generation and the reaction of physical blowing agent that gasification takes away heat, etc. In the reaction scenario, the above competitive reactions are all being staged, which is the fundamental reason for the polytropic reaction of polyurethane flexible foam. There are too many factors and too complicated. So wow, in actual production, the internal temperature change curve during the reaction is often controlled to standardize various reactions. As for how to restrict the reversibility of polymer chemical reactions, it is also a little troublesome.


Things have yin and yang. Just looking at the positive reaction speed is very fast, increasing exponentially, and it will take a long time for the reaction to get out of control. So wow, there must be something preventing it from increasing its reaction rate. As the reaction proceeds, there are the following points: the concentration of reactants decreases rapidly, the concentration of products increases rapidly, and a large amount of gas is rapidly generated to dilute the reaction heat. It should be noted that the effect of gas generation on the dilution and decrease of the concentrations of reactants and products is very Small. These barriers have also grown exponentially. With one increase and one decrease, we see the appearance of a steady rise in the bubble.


The microscopic determines the macroscopic. For example, we all know that the process of releasing carbon dioxide from the reaction of water to TDI is divided into two steps. The first step is to release carbon dioxide, and the second step is to generate other non-gaseous substances. Through the bond separation energy, we can calculate that about 70% of the heat is released in the first reaction, that is to say, the production of carbon dioxide gas is almost synchronized with the release of most of the heat. If it is reversed, the first reaction releases 30% of the heat, and the second reaction releases 70% of the heat, then the reaction scene on the macro scale is completely changed!


Numerous factors coexist in a complex coexistence, and its external performance must be a curve, such as the macroscopic distribution of amine tin catalyst in the equilibrium of foam opening, whether it is a spiral upward curve, a sine-cosine oscillation curve, or a chemical reaction. The logarithm is inseparable from the Chinese, and the natural logarithm is inseparable.


Send Inquiry