First of all, people should start working in units and systematically receive three-level labor safety education. Doing so is a highly responsible move for both the business and the individual. An enterprise that does not pay attention to the safety education of its employees, if anything happens, it will bring certain losses to the enterprise. In severe cases, it may be an immeasurable and irreversible disaster. To do a good job of safety in labor and production, it is necessary to start from the first day that employees enter the factory. At this time, safety education is carried out, and the impression of new employees is the deepest, which will accompany him and the company to grow together. After all, people are the first element of enterprise production. The tertiary education of the production and labor safety of the enterprise should be completed continuously without interruption, because the effect is the best.
After workers enter the workshop, they should not only take the initiative to receive various safety education, but also deal with the characteristics of the company's production, the performance of raw materials and products, and all aspects of production. Work hard and become familiar with it as soon as possible, and then learn labor skills. The purpose of this is determined by the characteristics of chemical plant production, flammability, explosion and poisoning. Due to their unfamiliarity with the working environment, newcomers are themselves a major safety hazard, and they are the most likely to cause various production accidents.
In production, you must be mentally focused, and do not distract your thoughts by doing things unrelated to work. Once an abnormal phenomenon is found, it should be dealt with in time and reported to the superior in time. If you can solve it by yourself (such as some raw materials spilled on your body, no need to report, you need to deal with it immediately, first remove the shirt, wash, etc.), take the correct method immediately, if you can't do it alone (fire alarm, etc.) While doing some things that can be done, report at the same time, so that things can be quickly controlled and resolved.
During production, the work place should be ventilated on all sides, and those with ventilation equipment should be activated. Do not use equipment that you are not familiar with or do not belong to your own range. When contacting raw materials, you should wear corresponding labor protection equipment, such as feeding TDI, you must wear gas masks, goggles and rubber gloves, long-sleeved work clothes, and work above the entrance of the wind. Do not start the electrical equipment with unknown status casually. Wear cloth gloves when checking the equipment to prevent work-related injuries such as pinching, falling, and scalding. Touch the heat transfer pipes, and judge whether the electrical equipment is leaking (if there is no electric pen), use the back of the hand, and do not directly touch it with the palm of your hand. In the inspection of the reaction kettle, when entering, the electric switch must be turned off, and the warning signs must be hung. If it is found that there is leakage within the workshop or factory, it should be reported and dealt with in a timely manner. More inspections should be conducted on the equipment within the work division, and the principle of not letting it go without checking.
If the skin comes into contact with the raw material, the spread of the raw material should be avoided and the area should be washed or removed. If splashed into the eyes, immediately rinse with water (or saline), if serious, seek medical attention. If poisoning occurs, leave the scene immediately and go to fresh air. When breathing stops, give artificial respiration and seek medical attention immediately. After going to the hospital, explain the situation to the doctor in detail, and do not hide it.
Usually at work, drink more water, wash your hands frequently, take a shower and change clothes more often, don't be afraid of trouble. Conditional, pay attention to drink more milk and herbal tea on weekdays. In the work room, keep the air unobstructed. It is necessary to consciously develop good work and personal hygiene habits, and put an end to all bad work and life behaviors.
In addition, in addition to being familiar with and proficient in using various fire-fighting equipment, we must keep in mind 119 (fire), 120 (emergency) and other alarm calls. And strictly abide by the chemical plant, all the rules and regulations related to safe labor and production. Prohibit and firmly put an end to the use of labor tools for labor production according to personal preferences or in a random attitude.
Chemical raw materials are toxic, not fake, but not terrible. The scary thing is not to master the knowledge of chemical industry and the knowledge of personal labor protection that should be possessed. As long as labor protection measures are fully taken during labor, flammable, explosive and poisoning incidents can be completely avoided and eliminated, so as to achieve a comprehensive and powerful guarantee for enterprise property and personal life and health.
