Tires and Wheels For Elderly Mobility Scooters Manufacturers
1. How To Check The Air Void Inside Foam Filled Tyres After Foaming PU?
如何检查填充胎内部的空鼓问题
a.Technology: we do a full tire shaping process before production. Our filling process uses centrifugal rotation to uniformly fill the PU raw materials into the tires and fully realize complete bonding between the tire and PU Foam, thus avoiding any air voids inside.
b. Every time replacing the material or starting the machine, we will cut one tire to check the inside of the tire to ensure there are no air voids or separations in the product.
2. The Assembly Process of Wheelchair Wheels and Tyres (轮椅轮子,轮胎组装流程)
A. The assembly of the bearings;
a. Install the bearing pressing tooling on the assembly machine;
b. Place the lower bearing rim, bushing and bearing;
c. Start the pneumatic switch to complete the bearina pressing operation.
B. The Assembly of the solid tyre and rim;
a. Install the tire pressing tooling on the assembly machine;
b. Place the rim on the lower tooling, put on the conical tooling and then put on the PU tire;
c.Start the pneumatic switch to complete the tire pressing operation.
3. The Factory Environment (工厂环境)
Aleader tire mainly focuses on the tires and wheels of walking aids for the elderly. Our products include wheelchair wheels and tires, stroller wheels and tires, intelligent equipment wheels and tires, shared transportation vehicle
wheels and tires etc. At present, the company has 15 polyurethane tire production lines, 2 wheel assembly production lines, 8 standard test equipment covering an area of 8000 square meters with 91 employees.
Hot Tags: tires and wheels for elderly mobility scooters manufacturers, China, suppliers, manufacturers, factory, wholesale, price, buy, best, for sale
